Our Product Range: Pan Shield 2K Polyurethane
Pan Shield 2K Polyurethane:
Pan Shield 2K PU is a two component Aliphatic Acrylic Polyurethane coating. Product is recommended to be o used over exposed car parking systems, Steel and concrete surface over suitable primer The product forms thin film and has exceptional weathering, Resistance to corrosion abrasion and chemical exposure.
Features and Advantages:
-
UV resistant
-
Abrasion and impact resistant ​
-
Glossy and superior finish
-
Product can be applied by brush and roller
Colors: Grey, Blue, White, Black, Golden Yellow, Green, Red and some RAL Shade Finish Glossy
Dry Film Thickness:50–100 microns per coat
Solids Content: By volume 58% +/- 2%
Theoretical Coverage Rate: 11 sq. mt/kg @ 50 microns 5.5 sq. mt/kg @ 100 microns
Mixing Ratio: 6:1 by volume Thinner used Pan Tech PU primer not exceeding 5% of total volume
Packing Size:
-
Resin – 4 kg
-
Hardener – 0.8 kg
-
Smaller pack of 1 kg is also available
Curing Schedule : 90 to 120 minutes after application @ 30°C
Disclaimer:
The information on this product sheet is given to the best of the manufacturer’s knowledge, based on laboratory testing and practical experience. However, as the product is often used under conditions beyond the manufacturer’s control, only the quality of the product itself can be guaranteed. The information contained in this datasheet is subject to modification from time to time in light of experience and policy of continuous product improvement. Gloss mentioned is typical values and may vary from customized shades.